AIR+ Active Mini Ventilator was developed for use together with AIR+ Smart Mask dust filter masks with a valve. It functions as a rechargeable micro fan that effectively extracts exhaled air from the mask to reduce humidity, heat and carbon dioxide build-up.

The fan weighs only 19 grams and mounts directly onto the mask valve, where it locks with a simple twist. It is equipped with an on/off button, making it easy to use in everyday life.

By reducing the relative humidity inside the mask by up to 40% and the temperature by up to 4 °C, the device contributes to a more comfortable working experience. At the same time, it helps prevent CO₂ build-up, reducing the risk of headaches and discomfort.

The fan is powered by a rechargeable battery with a runtime of about four hours per charge. It recharges via the included micro-USB cable and can be fully charged in about an hour and a half.

Metabo AV 18 is a cordless fan that allows ventilation and air circulation without the need for connection to the power grid. It is compatible with all Metabo 18V Li-Power and LiHD slide-on batteries, making it suitable for use in places without access to mains power.

The fan has a robust metal cage that ensures a high air volume with minimal turbulence. The cage can be tilted so that the airflow can be directed in the desired direction, and there are three different air speeds to choose from depending on requirements.

The construction is made with a solid frame and rubber feet that ensure stability during use. An integrated mounting plate allows the fan to be mounted on a tripod or wall, increasing flexibility of use.

The operating time can reach up to about seven hours using a 5.2 Ah battery, and the fan is designed to operate quietly even at the highest speed level.

Wahoo Kickr Headwind was developed to offer a more authentic outdoor cycling feel during indoor training. The fan is shaped and angled so that the airflow hits the body in the same way as the wind does during road cycling.

An integrated sensor can automatically adjust the fan speed based on your speed or heart rate, making the experience more dynamic. Alternatively, you can choose between four manual speed settings if you want full control.

The device can be connected via ANT+ to your training roller, heart rate monitor or speed sensor, or via Bluetooth to a smartphone where you can control the fan through an app. The maximum wind speed is 48 km/h, providing a powerful and targeted airflow.

Kickr Headwind is designed to be robust and requires minimal maintenance. It can be easily cleaned with a damp cloth after use and updated wirelessly with new software if necessary.

Fresh Pax Calima white is a multifunctional fan ready for use immediately after installation. It operates automatically thanks to humidity and light sensors and adjusts operation at three speed levels to ensure a comfortable indoor climate.

The fan can be expanded with app control via Pax Wireless, which provides access to additional functions such as heat transfer, calendar scheduling, boost level and ventilation function. This allows ventilation to be adapted to individual needs and daily routines.

The unit is equipped with an integrated multipole switch and is designed to function as a discreet and efficient solution for bathrooms, laundries or other environments where humidity control is important.

Milwaukee M12 AF-0 is a battery-powered fan that provides an airflow of up to 12.4 m³ per minute. It features three speed settings that allow the user to adjust the amount of air as needed. The fan has a blade diameter of 150 mm and can generate a maximum airflow speed of 600 m/min.

The head can rotate 360 degrees, offering flexibility in the direction of airflow. The unit can be mounted or hung in various ways thanks to integrated magnets, keyholes, hooks and through holes.

The fan has a runtime of up to two hours at maximum speed when used with a 3.0 Ah M12 REDLITHIUM battery. It is lightweight and compact, making it easy to transport and use in different work situations.

M12 AF-0 is part of Milwaukee's M12 series and is compatible with all M12 batteries. Supplied without battery and charger.

Airrex Ecocooler Rex48000 is developed for efficient cooling of large rooms, halls and workshops. It uses evaporative cooling, where air passes through wet pads, thereby lowering the temperature in an energy-efficient way.

The cooler is equipped with a maximised fan and an integrated UVC lamp that helps reduce bacterial growth in the water. In addition, it has a large water tank with a capacity of 230 litres and a water level indicator that makes it easy to monitor the level.

The unit is made with a robust PE frame and is mounted on wheels, making it easy to move despite a weight of 185 kg. It has an automatic water inlet and practical hooks for the water hose and power cable, making handling easier in daily use.

With an airflow of 48,000 m³/h and a variable speed of up to 660 revolutions per minute, the cooler can be adapted to different needs. It is powered by 230 V current and has a maximum consumption of 1100 W, offering a good balance between performance and energy consumption.

The Dell High Performance fan unit is an original component developed for 16th generation PowerEdge servers. It is intended for customer installation and serves as a central component in the server's cooling system.

The unit helps dissipate heat from internal system components such as processors, memory, and storage drives, contributing to stable operation and extending the server's lifespan.

The fan unit is compatible with several models in the PowerEdge series, including R760, R760xs, R7615, and R7625, and is designed for easy replacement in existing systems without the need for special tools.

Beurer LV200 Towerfan Tower Fan is designed to create a pleasant air circulation in the home. It has three speeds and three programmes – Basic, Nature and Sleep – which allow you to adapt the airflow to your needs and the time of day.

The fan has a 50-degree oscillating function that helps distribute the air evenly throughout the room. The integrated LED display shows the room temperature and allows you to monitor the selected settings.

A timer function allows you to set the operating time from 1 to 15 hours, making it suitable for both daytime and nighttime use. The noise level varies between approximately 43 and 58 dB depending on the speed.

With its slim white design and compact dimensions of 14 × 14 × 92 cm, the model fits most environments where you want fresh air without bulky equipment.

NORTH Desk Fan 30cm Satin Chrome is a classic desk fan designed to provide a comfortable airflow at home or in the office. It features a 35 W motor that can be set to three speeds – low, medium and high – so that the air circulation can be adapted to your needs.

The fan has four blades that ensure smooth and efficient air movement. The built-in oscillation function distributes air around the room, while the tilt function allows for more precise adjustment of the airflow direction.

The satin chrome design offers a timeless look, and the metal safety grille protects against contact with the rotating blades during operation. The combination of functionality and classic appearance makes the model suitable for both modern and traditional interiors.

The Sundström SR 500/SR 570 fan package consists of the SR 500 filter fan unit and the SR 570 visor. The system is designed to provide the user with stable positive pressure in the breathing zone, preventing the ingress of particles and other contaminants.

The SR 500 fan unit is lightweight and ergonomically designed, making it comfortable to wear for extended periods. It is operated by a push button and offers two airflow rates of 175 and 240 litres per minute. The airflow is automatically regulated to maintain a constant flow, even when the filters begin to clog.

The unit is powered by a removable lithium-ion battery that can be quickly recharged and provides up to 13 hours of operating time. The system features an integrated alarm with vibration, sound, and light that warns in case of low battery or reduced airflow.

The SR 570 visor protects both the face and head and features a flip-up polycarbonate visor that is impact- and scratch-resistant. It is equipped with an adjustable head harness, airflow control for comfort, and a standard attachment for hearing protectors. The air supply keeps the visor fog-free during use.

The package comes with the fan unit, standard battery, belt, filter adapters, particle filters, pre-filter, pre-filter holder, flow meter, and charger. The hose is not included, as it is supplied with the respective facepiece.

The system is approved according to EN 12941:1998, EN 12942:1998, EN 166:2001, and EN 812:2012 and meets IP67 protection requirements.

THERMEX Control 5-LEVELS for nordik is a transformer-based control unit that allows you to adjust the fan speed in five fixed levels. It is intended for use with fans from the Thermex Nordic series.

The control is designed to manage one fan per unit and offers the user the possibility to adapt the air volume according to their needs. The stepped control makes it easy to find a suitable balance between ventilation efficiency and noise level.

The unit is suitable as an accessory for the Nordic Evolution models and can be integrated into existing ventilation installations where manual operation control is desired.

The Sensotek ST 200 Mini Tower fan is designed as a compact, space-saving solution for personal cooling. The vertical construction makes it suitable for use on a desk, in a bedroom or in other places where discreet air circulation is desired.

The fan has three speed settings so that the airflow can be adjusted to your needs. An integrated oscillation function distributes the air evenly throughout the room, and control is via a simple control panel located on the top of the unit.

With a power of around 40 watts and a noise level of up to 52 dB at one metre distance, the ST 200 offers a balanced combination of performance and quiet operation. The compact size and low weight make it easy to move and position as needed.

HP E - redundant fan kit is a set of fans developed for HPE ProLiant ML110 Gen11 servers. The kit enables redundant cooling, meaning the system can maintain proper temperature control even if one of the fans fails.

With a compact structure of 39.4 cm in width, 11.1 cm in depth and 26.4 cm in height, and a weight of 1.5 kg, the kit is adapted to the server’s internal design and airflow. It helps protect components from overheating and extends the server’s lifespan.

The solution is intended for professional users and data centres where stable operation and efficient heat dissipation are required to maintain system performance and safety.

Swim & Fun Fan for blower is an original spare part used to replace the fan in the ventilation unit of the heat pump. It is developed to fit exactly the HEAT Booster ECO 5.5 kW, ensuring optimal airflow and efficient heat transfer.

The fan is intended for use in the external part of the heat pump, where it helps move air through the heat exchanger. A properly functioning fan is essential for the performance and energy efficiency of the heat pump.

Replacement can be carried out with the help of the included manual, which describes the step-by-step procedure. The product is supplied as a single spare part without additional accessories.

The Duka Pro 32TH fan is a compact and efficient fan designed to ensure a healthy indoor climate in environments with high humidity. It is equipped with both humidity control and a timer, which means it can start automatically when the humidity level rises and continue to run for a preset period afterwards.

The fan is equipped with ball bearings that contribute to greater durability and stable operation over time. With an air capacity of 185 m³/h and a noise level of 32 dB(A), it offers efficient ventilation without unnecessary noise.

The white front and 125 mm diameter make it suitable for discreet wall or ceiling installation, where it can naturally blend into the room design.

KGK Fan Tyfon 3000 is a lightweight, high-performance fan developed for efficient transport of air and construction dust. It can be used alone or in combination with dehumidifiers to speed up the drying of buildings and water-damaged areas.

The fan is designed with particular attention to durability and operational reliability. The robust construction and stackable design make it practical to use and easy to handle on site.

With low weight and double overload protection, the model is suitable for demanding environments where continuous operation and minimal maintenance are important factors.

The maximum air flow of 2600 m³/h and an air pressure of 300 Pa ensure efficient air circulation, while the maximum cable length of 38 metres provides flexibility in positioning during use.

The Master BL6800 fan is a powerful fan designed to move large volumes of air efficiently. It operates at 240 volts and has a capacity of 2200 cubic metres per hour, making it suitable for aeration, drying or ventilation in larger spaces.

The fan comes with a 7.6-metre-long air hose, allowing you to direct the airflow exactly where it is needed. The combination of high air flow and a flexible hose makes it practical in many work situations.

The construction is robust and intended for professional use, where operational reliability and efficiency are important factors. The unit is designed to withstand demanding conditions and deliver stable performance over time.

The Ruckus Wireless network device fan tray is a fan tray developed for use in Ruckus network devices. It functions as a central part of the device’s cooling system and helps maintain a stable operating temperature under load.

The fan tray is hot-swappable, meaning it can be replaced without interrupting the operation of the network device. This makes it suitable for environments where uptime is critical and maintenance must be performed quickly and efficiently.

With its dedicated construction for Ruckus equipment, it ensures compatibility and reliable performance in professional network installations.

Maico MURO120 Plus HT is a wall and ceiling fan that combines efficient air exchange with a discreet and compact structure. It is designed for installation in short ducts, making it suitable for smaller rooms where quick and reliable ventilation is required.

The fan is equipped with an integrated humidity sensor that automatically activates the unit when the air humidity exceeds a certain level. In addition, it has an adjustable shutdown timer that can be set between 3 and 25 minutes, so that ventilation continues for a short period after use.

With a capacity of 180 m³/h and a protection class of IP X4, the model is suitable for humid environments such as bathrooms. The white colour and simple design allow it to blend into most modern interiors.

Fresh Intellivent SKY is an intelligent fan developed for bathrooms, toilets and laundries where efficient ventilation is required. It is equipped with sensors that automatically adjust ventilation according to the room’s humidity and odour levels.

The fan has a unique odour sensor that detects strong smells and increases speed to quickly purify the air. At the same time, the automatic humidity control ensures that the fan starts automatically when humidity rises and stops when the level returns to normal.

An integrated light sensor allows the fan to react to movement and activity in the room, while an air exchange programme ensures fresh air even when it has not been used for a while.

Control is via a discreet touch panel that activates only when touched, or via Bluetooth connection through the 'Fresh Ventilation' app, where settings can be customised as needed.

The fan is designed for easy installation both on walls and ceilings and can be used in ducts of 100 mm and 125 mm. It is manufactured in Sweden and comes with a 5-year warranty.

The Milwaukee M18 AFG2-0 is a compact and robust fan developed to provide efficient air circulation in various work situations. It has an adjustable head that can rotate up to 300 degrees, allowing you to direct the airflow exactly where desired.

The fan features variable speed and a 180 mm blade that can move up to 1,444 m³ of air per hour. This allows the user to adjust the amount of air according to their needs – from gentle ventilation to a more powerful airflow.

The design is compact and equipped with an integrated carrying handle, making it easy to move between workplaces. It can stand freely, be wall-mounted via holes in the base, or hung using the side holes.

The M18 AFG2-0 is compatible with Milwaukee’s PACKOUT™ system and can be powered either by an M18™ REDLITHIUM™ battery or via the included AC adapter. With a 5.0 Ah battery, it can run for up to three hours at maximum speed.

The THERMEX Duct fan TD500/160 is a compact ventilation unit developed for effective air extraction in small spaces such as bathrooms and toilets. It can be ceiling-mounted and connected to ventilation ducts or flexible pipes, making it flexible during installation.

The fan is made of thermoplastic and has an IP44 protection class, meaning it is protected against moisture and splashes. The built-in motor is equipped with ball bearings and thermal protection, contributing to stable and safe operation over time.

With an airflow of up to 580 m³/h and a maximum noise level of 33 dB, the model offers efficient yet quiet ventilation. It can operate at different speeds and is suitable for both horizontal and vertical mounting.

The Thermex TD series is known for being able to be disassembled for cleaning without removing the duct, making maintenance simple and practical.

The Sensotek tower fan with tilt function ST800 is a vertical fan designed to create a comfortable airflow at home. It has a slim and modern design that makes it easy to place in different rooms without taking up too much space.

The fan offers three speed levels and three different ventilation programmes, so that the air circulation can be adapted to your needs. An integrated timer function allows you to set the operating time, which can be practical during the night or when you want automatic shut-off.

The tilt function allows you to adjust the direction of the airflow more precisely. The combination of functions makes the model suitable for both everyday use and hot summer days when you want an even and refreshing airflow.

HP E Front to Back Airflow Fan Tray is a fan tray developed to maintain proper airflow in the HPE 5900AF-48XGT-4QSFP+ switch. It directs air from the front to the back of the device, helping to maintain a stable temperature in rack environments with densely packed equipment.

The unit is hot-swappable, meaning it can be replaced without interrupting the switch’s operation. This makes maintenance and replacement quick and simple while maintaining system uptime.

The fan tray is an important component of the network infrastructure, where efficient cooling is essential to ensure reliable performance and longer equipment lifespan.

The Milwaukee M18™ high-performance fan is designed to provide efficient air circulation both in the workshop and on construction sites. It has three speed settings that allow you to adjust the airflow as needed, with a maximum air volume of up to 5,775 m³ per hour.

The fan has an adjustable head that can rotate 360°, so the direction of the airflow can be easily adapted to different work areas. The compact design and integrated carrying handle make it easy to transport and position where ventilation is needed.

The rubber feet ensure stability and protect surfaces from scratches. The unit can be powered either by an M18™ REDLITHIUM™ battery or via mains power, offering flexibility of use. With a 5.0 Ah battery, the fan can run for up to nine hours on a single charge.

The fan is compatible with all MILWAUKEE® M18™ batteries, making it a practical part of an existing Milwaukee system.

Thermex EDM100Z is an extractor fan developed for efficient ventilation in small spaces such as bathrooms, toilets and other areas that require humidity and odour control. It can be mounted both on the ceiling and on the wall, offering flexibility during installation.

The fan is made of robust ABS plastic and is equipped with ball bearings, which contribute to longer service life and stable operation. The double insulation increases safety, while the IPX4 rating protects against moisture and water splashes.

With an airflow of 95 cubic metres per hour and a sound pressure level of 40 dB, the EDM100Z provides quiet and efficient ventilation. It is suitable for continuous operation and requires minimal maintenance.

The construction makes it ideal for both new installations and the replacement of existing fans, where a reliable and discreet solution is required.

Sensotek ST 800 is a tower fan designed to provide efficient ventilation both at home and in the office. It has a slim design with a unique aluminium panel, making it suitable for rooms where both functionality and aesthetics are important.

The fan offers three ventilation speeds and three airflow modes – Normal, Natural and Night Breeze – allowing you to adjust the airflow according to your needs and the time of day.

An integrated oscillation function ensures even air distribution in the room, while the tilt function allows you to adjust the fan angle to 0°, 6° or 12°, so you can more precisely direct the airflow.

ST 800 is equipped with an LED display and a timer function of up to 7.5 hours. It comes with a remote control, which makes it easy to use, but requires two AAA batteries not included.

With a power of about 40 watts and a height of 103 cm, the model combines energy efficiency and good performance in a compact format.

HP - fan is an original fan developed for the HP EliteBook 830 G5 Notebook. It functions as a central part of the computer’s cooling system and helps maintain a stable temperature during operation.

The fan is designed to fit perfectly with the specified model and provides the necessary airflow to prevent overheating of internal components. As an original spare part, it ensures optimal performance and compatibility with HP hardware.

The product is suitable as a replacement for a defective or worn-out fan in the EliteBook 830 G5 and can help extend the computer’s lifespan by ensuring proper heat dissipation.