DJI Ronin Part 8 Left arm standard is an original component designed for the DJI Ronin series of camera stabilisers. It functions as the left arm in the construction and is manufactured to maintain the mechanical balance and stability for which the system is known.

The arm is made of a durable material and comes in black, matching the rest of the equipment. As an original spare part, it ensures compatibility with DJI Ronin and preserves the product’s original functionality.

This part is intended for users who need to replace or repair the left arm of their Ronin stabiliser and is supplied as a single piece in the package.

The Elma Instruments Tri100 is an aluminium camera tripod that offers a good balance between light weight and stable construction. It is designed for use with measuring instruments and lasers where precise positioning is important.

The tripod is equipped with a standard 1/4-inch thread, making it compatible with a wide range of devices, including Leica, Elma X360 and X2 lasers. The variable height can be adjusted from 70 to 172 cm, providing flexibility in various working situations.

Weighing 2.3 kg, the tripod is easy to transport yet stable enough to ensure accurate measurements and secure mounting of equipment.

The Tilta Hermit POV Support System XXL V Mount is an all-in-one system designed to enable first-person perspective shots. The system is based on a lightweight and scratch-resistant carbon fibre helmet that serves as the base for mounting cameras and accessories.

The helmet supports multiple configuration options with rosette-based mounting arms that can be attached both at the front and back. This allows the camera angle and balance to be adjusted as needed.

An adjustable battery plate on the back of the helmet allows the use of V-mount batteries to power the camera and accessories. The battery plate is connected to a balancing module that can be adjusted to compensate for weight when the camera is mounted at the front.

The system includes counterweights for additional balance as well as multiple mounting points – including cold shoe, 1/4"-20 and 3/8"-16 threads – for attaching additional equipment such as wireless transmitters or lights.

The included 15 mm rod adapters and rods in various lengths allow the system to be integrated into rod-based camera rigs. With five different mounting options, the Hermit system offers a high degree of flexibility for sports, action and film shooting.

The Manfrotto MVA524W camera kit is a vertical offset component consisting of two universal mounting units connected by a height-adjustable spacer. This design allows two SYMPLA rod sets to operate in parallel but at different heights.

The solution is particularly useful when working with cameras and lenses where there is a height difference between the camera body, front lens, and L-bracket. The adjustable spacing allows this difference to be compensated for, achieving a stable and precise setup.

The kit is finished in black and weighs 630 grams, offering a good balance between robustness and manageability. It is designed to be part of Manfrotto’s modular SYMPLA system, used in professional video and film productions.

The Jabra Panacast 50 Table/Camera Stand is a dedicated table stand designed for the PanaCast 50 video conferencing system. It allows the camera to be placed as a standalone device on a table, providing more freedom in meeting rooms and temporary setups.

The stand comes in grey and has a discreet design that fits into professional environments. It is intended for desktop use and provides a stable base for the camera during meetings.

With an adjustable height from 152 to 317 mm, the user can adjust the camera position so that the viewing angle fits the room and participants. This makes the stand suitable for both fixed and flexible meeting solutions.

As an original Jabra accessory, it is designed to match the PanaCast 50 and 50 Room System, ensuring compatibility and a uniform appearance.

The Tilta TA-T18-E camera kit is a fully equipped set that provides the Sony a7S III with a solid and flexible rig system. The kit consists of a precision-engineered camera cage that protects the camera while offering numerous mounting points for accessories such as microphones, lights, and monitors.

The cage is equipped with multiple 1/4”-20 and 3/8”-16 threads, two cold shoe mounts, a rosette connection for the side handgrip, and an opening for a 15 mm rod. The base also features several mounting holes that make it easier to balance the camera on gimbals.

The set includes both Arca- and Manfrotto-compatible quick release plates, a 15 mm LWS baseplate with matching rods, an HDMI adapter and cable clamp, as well as an advanced left handgrip with power and start/stop function. This allows for an ergonomic and efficient setup for both handheld and tripod shooting.

The materials consist of aluminium, stainless steel, and wood, offering a combination of strength, durability, and comfort. With a weight of 1.36 kg and compact dimensions, the kit is ideal for professional users who want a modular and reliable system for their Sony a7S III.

The Manfrotto MVCCL camera cage is a height-adjustable cage with quick release, designed for larger DSLR cameras such as the Canon 1D series and Nikon D3X, D4, D5, as well as models with a battery grip. The construction is lightweight yet sturdy, offering multiple options for attaching accessories to the top and side surfaces.

The cage features two anti-rotation mounts compatible with Manfrotto 244MICRO-AR and Arri standard fittings. The included handle can be reversed and positioned above the lens area, allowing the use of XLR adapters. The handle can be folded for easy transport and can also be mounted on the vertical 15 mm rod as an additional grip.

The handle integrates a cold shoe mount and a 15 mm rod clamp, allowing the installation of various viewfinder solutions. In addition, an HDMI cable clamp is included, which can be attached to the vertical rod to protect cables and connections during use.

The cage includes a height-adjustable 15 mm lightweight rod clamp that ensures the correct distance between the rods and the lens centre, making it compatible with standard matte boxes and follow focus units.

Tilta - ing RED Komodo Kit A- Black is a camera cage that provides a robust and flexible frame around the RED KOMODO camera. The cage consists of connected side plates, a base plate and a top plate that attach directly to the camera.

The top plate is equipped with a cold shoe and 1/4"-20 threads, allowing the mounting of various accessories such as microphones, lights or monitors. The base plate has several 1/4"-20 mounting threads that make it easier to balance the camera on gimbals.

An adapter plate is included, allowing the cage to be mounted on the Tilta 15mm LWS baseplate for RED KOMODO cage with quick release. The cage also features four rosette mounts – two on each side – as well as both 1/4"-20 and 3/8"-16 threads for attaching additional accessories.

The design allows the setup to be customised as needed, and Tilta offers a range of compatible accessories such as handles, monitor mounts and base plates that can further expand functionality.

The Manfrotto PADDED TRIPOD is a carrying case designed for transporting tripods with legs. It is made of ballistic nylon, which offers high resistance to wear and protects the equipment from impacts and scratches during transport.

The bag has a length of 120 cm and a weight of 1.5 kg, making it suitable for larger tripods. The padded construction provides additional protection, while the black colour gives it a classic and professional appearance.

With its simple design and focus on functionality, the bag is a practical choice for photographers who want a reliable solution for storing and transporting their tripod equipment.

The Tilta TA-T01-B camera cage was designed for the Blackmagic Pocket Cinema Camera 4K and 6K and serves as a protective and modular cage around the camera. The construction allows the mounting of additional accessories such as handles, monitors, microphones, and SSD drives.

The set is a so-called 'Basic Kit' version, which includes the complete camera cage as well as accessories such as a top handle, SSD holder, USB-C cable, and HDMI adapter that match the cage design. This makes it easier to integrate external devices into a compact and stable setup.

The cage is made in a grey finish and features threads in 1/4" and 3/8" sizes, providing flexibility when mounting various devices. It is suitable for users who want a more professional and ergonomic camera configuration.

The Manfrotto 244RC is an adjustable arm that gives photographers maximum freedom when setting up cameras and lighting. The arm is equipped with a large locking knob that allows friction to be adjusted and the position to be precisely fixed as needed.

The model features a quick release plate with a secondary safety lock, allowing easy mounting and dismounting of the camera without compromising stability. It is compatible with standard studs and threads, including 5/8" studs as well as 3/8" and 1/4-20" internal threads.

With a maximum load capacity of 4 kg and a weight of 1.1 kg, the arm is suitable for both cameras and accessories such as lamps or microphones. It works particularly well with Manfrotto’s 035S Super Clamp, making it ideal for flexible setups in the studio or on location.

The Tilta ES-T20-B-V camera kit is an advanced camera cage and accessory set specifically designed for the Sony FX6. The set provides both mechanical protection and a variety of mounting options for accessories such as handles, monitors, wireless transmitters, and power supply.

The top plate is adapted to the original FX6 handle and can be expanded with Tilta’s adjustable top handle, which includes a mount for the LCD monitor. It also features 15mm LWS rod adapters that allow accessories to be mounted above the lens.

The baseplate features a quick-release function and supports the mounting of 15mm rods both at the front and rear, providing flexibility for setting up matte boxes, follow focus systems, and other accessories. The dual Arri rosettes allow the addition of handles or extended arms for handheld shooting.

The side arm provides additional protection for the camera and multiple 1/4''-20 and 3/8''-16 threads with positioning holes, allowing accessories to be securely mounted. There is also space for reusable camera markings that can be used for clear identification in multi-camera setups.

The set includes a V-mount battery plate that mounts directly into the FX6’s battery compartment and can be connected to the top plate for additional stability. The battery plate features two 14.8V P-Tap outputs, one 14.8V 2-pin Lemo connector, and one 5V USB port, providing flexible power supply for the camera and accessories.

The Manfrotto 143RC Magic Arm with Quick Release Plate is a professional arm designed to hold cameras, camcorders, or other devices in exactly the desired position. The arm can be locked at multiple joints with a single handle, allowing quick and easy angle adjustment during shooting.

The model comes with a quick release plate based on Manfrotto’s 200PL-14 system, ensuring fast mounting and dismounting of the camera. The secondary safety lock prevents accidental release, increasing safety during use.

The arm fits 5/8" connections and works particularly well with Manfrotto’s 035 Super Clamp, making it suitable for both studio and field use. With a maximum load capacity of 4 kg and a weight of 1.1 kg, it combines strength and flexibility in a compact design.

The Tilta TA-T18-FCC-B camera cage is a complete camera cage that encloses the Sony a7S III and protects the camera from impacts and wear during shooting. The aluminium and stainless steel construction provides a strong yet lightweight frame while allowing easy access to the camera’s ports and controls.

The cage is equipped with multiple 1/4”-20 and 3/8”-16 threads, two cold shoe mounting points, and a rosette connection that allows various handles and accessories to be attached. There is also an opening for mounting a single 15 mm rod, providing flexibility in setup.

The base features multiple mounting holes that make it easier to balance the camera on gimbals, and various baseplates can be added to support rod systems or power solutions. The cage can be combined with Tilta’s quick-release top handle and side handles to create an ergonomic and modular setup.

The Manfrotto 420CSU tripod is a camera tripod in a silver finish, designed to provide stable support for cameras and lighting equipment. It is part of Manfrotto’s professional tripod series, known for its durability and precision.

The tripod is designed with a focus on stability and flexibility, making it suitable for both photography and video production. The silver surface gives it a classic and professional appearance, while the choice of materials ensures a long service life.

With its solid construction and compatibility with various types of camera heads and accessories, the 420CSU can be used in many different shooting situations – from studio setups to outdoor use.

Tilta - ing RED Komodo Kit B-Tactical Gray is a camera cage specifically designed for RED KOMODO. The set consists of connected side plates, a bottom plate and a top plate that together form a stable frame around the camera.

The top plate features an integrated cold shoe and multiple 1/4"-20 threads, allowing accessories such as monitors, microphones or lights to be mounted. The cage is equipped with both 1/4"-20 and 3/8"-16 threads as well as four rosette mounts – two on each side – providing many options to customise the setup as needed.

The bottom plate has several mounting points that make it easier to balance the camera on gimbals. An included adapter plate allows the cage to be attached to the Tilta 15mm LWS baseplate for RED KOMODO cage with quick release, enabling flexible and fast mounting.

The kit comes in a tactical grey tone and is designed to provide both protection and functionality in professional shooting situations.

The Manfrotto 816 tripod is a professional camera tripod designed for photographers who require maximum stability and strength. The tripod is made from a combination of aluminium and steel, resulting in a robust construction that withstands intensive use both in the studio and outdoors.

With a maximum height of 2.74 metres, the tripod offers flexibility in setup, while the high weight of 80 kg contributes to an extremely stable base, even when using heavy camera equipment. The maximum load capacity of 15 kg makes it suitable for professional cameras and lenses.

The tripod has one leg, making it particularly suitable for situations where quick setup and adjustment are required, while maintaining a high level of stability. The black finish gives it a classic and professional appearance.

The Tilta TA-T18-A camera kit is a half camera cage that serves as a protective frame around the Sony a7S III. The construction provides both physical protection and the ability to mount additional accessories such as microphones, lights or monitors via the numerous 1/4”‑20 threads and a cold shoe mount.

The cage features multiple mounting holes on the underside, making it easier to balance the camera on gimbals and other stabilisation systems. It can be combined with various baseplates to add rods or power supply modules as needed.

The set includes a lightweight quick‑release top handle with Arri locating pins, a NATO rail, a wooden side handle, and a cold shoe mount that can be attached to the top of the handle. This combination provides a flexible and ergonomic setup for both handheld and tripod‑based shooting.

The materials consist of stainless steel and wood, offering a balance between strength and comfort. With a weight of 680 grams and compact dimensions, the set is ideal for professional users seeking solid yet handy camera accessories.

The Tilta TA-T01-A camera cage is an advanced cage for the Blackmagic Pocket Cinema Camera 4K and 6K, providing the camera with additional protection and many options for mounting accessories. The aluminium construction ensures low weight and high strength, making it suitable for both studio and outdoor shooting.

The set includes a number of components that together form a fully built rig. It includes, among other things, a complete camera cage, a quick-release top handle, a rubber-coated side handle, an SSD mount for Samsung T5, a 90-degree USB-C cable, a 15 mm LWS baseplate with two 15x200 mm rods, as well as a partial sunhood for the screen.

With 1/4" and 3/8" threads, the user can attach microphones, lights, monitors, and other accessories directly to the cage. The grey finish gives a professional appearance, while the precise fit ensures stability and easy access to the camera’s ports and buttons.

The Tilta Lightweight Kit for the Canon C70 was designed to protect the camera while providing the ability to mount a wide range of accessories. The kit consists of a full cage with multiple 1/4"-20 threads, positioning pins, dual cold shoe mounts, and a NATO rail, making it compatible with Tilta side handles type IV and VI.

The cage features an ARRI-compatible rosette connection and a port for mounting rod accessories, offering flexibility when building setups such as follow focus systems. The rosette is located at the bottom, allowing an adjustable top handle to be mounted for better ergonomics during vertical shooting.

An additional safety mount with non-slip padding in the upper left corner increases stability, while the baseplate has threads for mounting on various quick release plates and is compatible with the ARCA mount on the RS2 mounting plate.

The kit includes an EF Mount Lens Adapter Support, providing additional support for RF-to-EF adapters, as well as a 15 mm LWS Baseplate Type V, which adds rod support for mounting matte boxes and other accessories. The low-profile baseplate is matched to the height of the Canon C70, ensuring proper alignment with the optical centre of the sensor.

The baseplate is compatible with Tilta standard dovetails and can also be used with other quick release systems via 1/4"-20 and 3/8"-16 threads. Note that the front and rear rod mounts on the baseplate are separate.

The Tiltaing Sony a7S III Lightweight Kit was designed to provide a stable and flexible base for filming with the Sony a7S III. The kit is made from aluminium and stainless steel, offering a good balance between low weight and high strength.

The design is specifically tailored to the Sony a7S III, so the camera fits perfectly into the frame and is optimally supported during use. The black finish gives a professional appearance, while the materials protect the camera from shocks and wear.

With a weight of 1.36 kg and compact dimensions, the kit is easy to handle both on a tripod and in handheld setups. It is suitable for users who want a reliable and modular system for video recording.

The Tilta TA-T30-FCC-B camera cage is a complete camera cage that serves as a protective frame around the Sony a7 IV, a1, a7S III, a7R IV, a7R V, a7 III, a7R III and A9. The construction provides both physical protection and the ability to mount additional accessories such as handles, microphones and lighting.

The cage is made of aluminium and stainless steel, providing a lightweight yet sturdy structure. It is equipped with multiple 1/4"-20 and 3/8"-16 threads with positioning pins, cold shoe mounts and a NATO rail, making it compatible with a wide range of Tilta accessories.

In addition, the cage features an ARRI-compatible rosette connection and mounts for rods, allowing the setup of a complete rig for professional video recording. An included screwdriver can be stored at the bottom of the cage for quick adjustments in the field.

The bottom of the cage has 1/4"-20 threads, allowing the camera to be attached to various quick release plates, and it is compatible with the Tiltaing 15mm LWS Baseplate Type IV. Weighing under 200 grams, it is a lightweight yet functional accessory for professional camera setups.

The Tilta TA-T50-FCC-B is a complete camera cage that protects the camera body while providing extensive options for mounting additional accessories. The aluminium and stainless steel construction ensures low weight with high strength.

The cage is equipped with several universal mounting points, including NATO rails, ARRI rosette, cold shoe, and 1/4”-20 threads with locating pins. This allows the addition of handles, lights, microphones, and other accessories as needed.

The design provides easy access to the camera’s ports and controls, while the baseplate features an Arca-Swiss connection that is directly compatible with DJI RS3 Pro, RS3, and RS2 gimbals. It can also be mounted to Tilta’s modular baseplate system via the same ARCA connection.

Included HDMI and USB-C cable clamps help secure cables during shooting, and the included Allen keys make it easy to adjust and fasten components.

The Tilta TA-T01-FCC-B is a so-called 'Full Cage' that encloses the entire camera body and protects it from impacts and wear during shooting. The construction is made of aluminium and stainless steel, providing a good balance between low weight and high strength.

The cage is specifically designed for the Blackmagic Pocket Cinema Camera 4K and 6K and provides access to all ports and buttons while offering multiple 1/4”‑20 and 3/8”‑16 threads as well as three cold shoe mounting points for accessories such as microphones, lights, or monitors.

The base features several mounting holes that make it easier to adjust balance when the camera is mounted on gimbals. In addition, various baseplates and handles can be attached to adapt the setup to different shooting situations.

The cage can be combined with the Tilta 15mm LWS Baseplate Type I and other compatible modules, making it suitable for both studio and field productions.

The Tilta ES-T20-A camera cage is a specially designed cage for the Sony FX6 that provides both mechanical protection and flexible mounting options. The construction is made of aluminium and stainless steel, ensuring low weight and high durability.

The top plate is designed to fit around the original camera handle and supports the mounting of Tilta’s own top handle as well as monitor mounts. The integrated monitor mount allows the use of the original FX6 screen mount.

The cage includes a Quick Release Baseplate with 15 mm LWS rods, allowing accessories to be mounted in front of or behind the camera. In addition, it features dual Arri rosettes for attaching handles or extended arms for handheld shooting.

The side arm provides additional protection and multiple 1/4"-20 and 3/8"-16 threads with positioning holes, allowing a variety of accessories to be mounted. It also provides space for reusable camera markings that can be used for clear identification in multi-camera setups.

The Tilta Hydra Alien Car Mounting System Gold Mount is designed to work with compact gimbals and offers a lightweight yet robust solution for vehicle-mounted filming. The system enables dynamic camera movements without the need for heavy rig setups.

The construction consists of a flexible set of suction cups and plates that can be connected in various ways to achieve precise camera positioning. This modular approach allows the user to adapt the setup to the shape of the vehicle and the desired camera angle.

A shock-absorbing arm system reduces vibrations and jolts while driving, while a spring-loaded cradle head solution allows the gimbal to be mounted in both normal and inverted positions. This provides the freedom to film from high, low, or side angles.

The system is suitable for professional film productions, commercial shoots, and other situations where stable and creative vehicle shots are required.

The Tilta TA-T18-FCC is a complete camera cage that encloses the Sony a7S III and protects the camera from impacts and wear during shooting. The aluminium and stainless steel construction provides a sturdy frame while keeping the weight low to maintain the balance of the setup.

The cage is equipped with multiple 1/4”-20 and 3/8”-16 threads, two cold-shoe mounting points, and a rosette connection that allows various handles and accessories to be attached. There is also an opening for mounting a single 15 mm rod, offering flexibility for setting up additional equipment such as microphones, lights, or monitors.

The base features multiple mounting holes that make it easier to adjust the balance when the camera is used on a gimbal. Various baseplates can be added to adapt the setup to different shooting requirements, including power supply and rod systems.

The cage can be combined with Tilta’s quick-release top handle and side handle, allowing ergonomic adjustment to the shooting situation.

The Tilta TA-T30-A-B camera cage is a camera cage designed for the Sony a7 IV, a1, a7S III, a7R IV, a7R V, a7 III, a7R III and A9. It serves as a protective frame around the camera while allowing the mounting of additional accessories such as handles, monitors and microphones.

The cage is made of aluminium and stainless steel, resulting in a lightweight yet stable construction. It is equipped with multiple 1/4''-20 and 3/8''-16 threads with locating pins, cold shoe mounts and a NATO rail, allowing the setup to be customised as needed.

In addition, the cage features an ARRI-compatible rosette connection and mounts for rods, making it compatible with the Tiltaing 15mm LWS Baseplate Type IV and other Tilta components. An HDMI clamp is included, allowing cables to be securely fastened and protected from accidental pulling.

With a width of 150 mm, a depth of 116 mm and a height of 63 mm, the cage weighs only 196.5 grams, making it easy to handle without adding unnecessary weight to the camera setup.